Round Ceiling Speaker
 |
Pyle Home PDIC81RD 8-Inch Two-Way In-Ceiling Speaker System (Pair) Sale Price: Too low to display  |
|
8'' Two-Way In-Ceiling Speaker System: "In-Ceiling 2-Way Speaker System8'' Midbass Speaker 1'' High Temperature Voice Coil Directable 1/2'' Polymer Dome Tweeter 250 Watts Rated Peak Power Frequency Response: 50Hz-20K Hz 4-8 Ohm Impedance Cut-out Dimensions: 9 3/8'' Diameter x 3 1/2'' Depth Overall Dimensions: 10 1/2'' Diameter x 3 1/2'' Depth Sold as a Pair" [blank] |
 |
JBL SP8CII 2-Way, Round 8-Inch In-Ceiling Speaker with Swivel Mount Tweeter (Pair) Sale Price: Too low to display |
|
JBL 2-Way Ceiling speaker with a 8" titanium laminate mid base driver and a 1" titanium laminate tweeter. |
 |
JBL SP6CII 2-way, Round 6.5" In-Ceiling Speaker with Swivel Mount Tweeter (Pair) Sale Price: Too low to display |
|
This 2-way in-ceiling loudspeaker delivers powerful, clear JBL sound in a space-saving package. The titanium-laminate cone woofer with rubber surround delivers tight bass for extended listening sessions... |
 |
Definitive Technology UESA/Di 5.5R Round In-ceiling Speaker (Single) Sale Price: $219.00 |
|
Definitive’s in-ceiling DI 5.5R speakers feature near-invisibility thanks to their small diameters, hidden flange design, and low profile micro-perf grilles. They are as easy to install as traditional flanged flush-mount speakers, and don’t require custom sheetrock/spackle skills to install yet they are practically invisible... |
 |
SPEARE TOOLS AB 1610 Adjustable Speaker-Cutter Hole Saw Sale Price: $21.98 |
|
SPEARE TOOLS AB 1610 Adjustable Speaker-Cutter Hole Saw Cuts round holes from 6 1/4"10 3/8" in drywall and ceiling tile with no mess when using the clear, flexible dust shield. It fits a 3/8" drill chuckand can be used with cordless drills... |
 |
Polk Audio RC6s In-Ceiling Stereo Speaker (Single, White) Sale Price: $87.87 |
|
6-1/2" Dynamic Balance composite cone woofer dual 3/4" soft dome tweeters recommended amplifier power: 20-100 watts frequency response 40-20,000 Hz sensitivity 89 dB 8-ohm impedance cutout dimensions: 7-9/16" diameter depth (assumes 1/2" drywall): 2-3/8" spring-loaded Push Post connectors for use with bare speaker wire moisture-resistant materials allow safe use in bathrooms, kitchens, saunas, and under outdoor eaves paintable white matte grilles |
 |
Polk Audio RC60i In-Ceiling / In-Wall Speakers (Pair, White) Sale Price: Too low to display |
|
Polk Audio's RCi Series in-wall speakers let you deliver sound to every room in your home without sacrificing a single square inch of valuable floor or shelf space, and the RC60i in-wall speakers are no exception... |
 |
12 White Round Grill Sale Price: $4.75 |
|
12" white painted metal grill resists fading and is easily cleaned. Accepts standard 8" speaker (EIA). |
 |
Polk Audio RC80i 2-Way In-Ceiling Speakers (Pair, White) Sale Price: $115.99 |
|
The Polk Audio RC80i 2-way In-ceiling Speaker delivers incredible stereo sound to any room in your home from speakers you can barely see, without using any floor or shelf space. The RC80i is easy to install, requiring only that you cut a hole, feed the wires through, and simply drop the speaker in where it is held in place by rotating cams that safely secure the speaker with no extra assembly or mess... |
 |
Architech Pro Series Ap-815 LCRs 8-Inch 2-Way Round Angled In-Ceiling LCR Loudspeaker Sale Price: Too low to display |
|
LCRS 8-Inch 2-way round angled in-ceiling LCR loudspeaker. |
Mounting ceiling speakers in a wall?
I have a 7.1 surround sound receiver. I bought a 5.1 speaker set and am buying 2 additional speakers for the middle satellite speakers. I need in-wall speakers for logistic reasons. Most of the in-wall speakers are too big for the location I need but the round shape of the in-ceiling speakers would work.
Are there any issues with using in-ceiling speakers in a side-wall?
I did the same thing using a 9.1 system. Basically make sure of the depth of the wall. Some inner walls are not deep enough to accommodate the speaker. I used Polk, a little more expensive but the end result was satisfying considering that you don't want to be cutting into your drywall and running cable more than once.
« Stepped Attenuator | Home | Dynamic Range »
Leave a Comment